When something stops working on your pool, the last thing you need is to track down three different contractors for three different problems. Our pool equipment repair service covers the full range of mechanical systems that keep your pool running, from the equipment pad to the plumbing, from the control panel to the circulation components. Family owned with more than 10 years of hands-on experience, we diagnose accurately, repair durably, and communicate clearly at every step.
Pool equipment is an interconnected system: when one component underperforms, it strains everything connected to it. A struggling pump restricts flow to the filter and heater. A faulty pressure switch makes a heater cycle erratically. A failing multiport valve lets unfiltered water bypass the media entirely. Diagnosing correctly means understanding how the components work together, not just replacing the part that threw an error code, and our technicians evaluate the full equipment picture before recommending any repair, because the visible symptom and the root cause are not always the same thing.
We work on all major equipment categories and primarily use and recommend Pentair for its proven performance in Florida’s demanding year-round environment. As a licensed (CPC1459515), insured FSPA member, we hold ourselves to a standard beyond swapping parts, which is why so many homeowners across Lee, Collier, Charlotte, and Sarasota Counties include us in their pool service & maintenance program from the start.
In states with a defined swim season, a broken pump can wait out the off-season. In Fort Myers there is no off-season: your equipment runs every day of the year, accumulating wear at a rate northern systems never see, while heat, humidity, and UV stress electrical components, rubber seals, and PVC fittings. Deferred repairs compound faster here than anywhere else. A failing capacitor, a worn shaft seal leaking into the motor housing, or a corroded control board connection can go from minor repair to full component replacement in a matter of weeks.
Degraded equipment also ripples into water quality. A pump below design flow rate means the filter is not turning over the volume it should, leaving contaminants recirculating and setting up persistent cloudiness and algae. A heater with a faulty thermostat creates temperature swings that throw off chemical balancing, since warmer water burns chemicals faster. Prompt repair protects the whole ecosystem of your pool’s health and keeps your weekly pool cleaning program effective.
Some problems are obvious: a pump that will not start, a heater error code, a filter with no pressure. Others are subtler but just as damaging: a variable speed pump running wrong RPM settings and quietly wasting energy, a scaling salt cell losing chlorine output, a failed check valve draining the heater every time the pump stops. We document findings clearly so you understand exactly what was found and why. And if a component has reached end of life, we say so honestly and present replacement options with no pressure, with pool financing options through Lyon Financial, HFS, and Viking available when replacement or upgrades are involved.
Equipment repair does not happen in isolation. If a repair uncovers evidence of a water leak, our pool leak detection team investigates further. If scale on components is linked to deposits on your tile or finish, pool tile cleaning and spraying and acid wash address the downstream effects. We also provide dedicated pool pump repair and pool heater repair for specific component issues, and pool filter cleaning keeps filtration performing at the level your repaired equipment expects. We serve all of Southwest Florida; see the full list on our service areas page.
It depends on the component’s age, the nature of the failure, and the repair-versus-replacement cost relationship. A pump motor that fails after twelve years of continuous Florida operation may be smarter to replace; a failed shaft seal on a three-year-old unit is almost always a straightforward repair. Automation failures often involve a single board or relay rather than the whole unit. We assess each situation individually and give you an honest recommendation based on what the data shows, including when replacement is the better long-term investment.
Florida’s heat, humidity, UV, and year-round operation create a distinctive wear pattern. Our most frequent calls involve pump motor capacitor failure, shaft seal degradation, multiport valve spider gasket failure causing filter bypass, salt cell scaling and output loss, heater ignition and thermostat faults, PVC union cracking, and automation relay or board failures. Variable speed pumps bring their own diagnostics around programming errors, drive faults, and communication failures.
Unusual pump noise is one of the most reliable early warnings. High-pitched whining or grinding typically means worn motor bearings, straightforward to fix early but fatal to the motor if ignored. A cavitation-like sucking or bubbling sound usually points to air intrusion: a cracked fitting, failed lid o-ring, or low water level. Rattling or vibration can mean debris in the impeller housing or loose mounting hardware. None of these should be left running; strain accelerates the damage and raises the repair cost.
Yes, significantly. Below-spec circulation undermines your entire chemical program, since contaminants that should be filtered out remain in the water consuming sanitizer. Thermostat faults create temperature instability that changes chemical consumption rates. A scaling salt cell produces less free chlorine than your readings suggest, a sanitation gap that stays invisible until water quality deteriorates. Balanced water depends on equipment running at its designed specifications.
Our technicians are trained on all major brands and can diagnose, repair, and service most systems regardless of manufacturer. We primarily recommend Pentair for new installations and replacements because of its track record and parts availability in Florida, but we work on whatever you have. If a component needs replacing and you are open to it, we can discuss whether a pool equipment upgrades path to Pentair makes sense for your setup.
We are available for genuine emergencies outside standard business hours (current hours are on our contact page). If your equipment has failed and your pool is at risk, for example a complete pump failure leaving no circulation in the heat, reach out and we will assess urgency and respond. For non-emergencies discovered after hours, note what you observed and contact us first thing the next business day so we can schedule a diagnostic visit promptly.
Every day a failing component runs, it strains the equipment around it and raises the cost of the eventual repair. A&E Pools brings more than 10 years of experience, honest diagnostics, and full-system expertise to equipment repair across Fort Myers and all of Southwest Florida. Licensed, insured, and ready to help. Call (239) 888-6617 today.
